Accesorios

Electric Case Feed System allows you to simply dump fired, cleaned and deprimed hulls into the bowl.  The Case Feeder orients the hulls right side up and fills the feed tube automatically, turning itself on and off as necessary, to keep the case feed tube full.

The Casefeeder will hold 600 .38 Special cases or 500 .223 Rem cases. 

Be aware this casefeeder is without the Case feeder plate that is appropriate for the type of ammunition you wish to reload. See here the Case feeder plate you need. 

A common question we hear is “Can I use the Bullet Feeder on my 550?” Or “Can I use the Bullet Feeder and still continue to use my powder check on my 650?”.

Such Seating and Crimping dies are available, and so we decided it was time we made them directly available to our customers as well. LEE Precision produces these, so no question about the quality. 

The 2-in-1 Seating and crimping die include an O-ring lock machined into the nut, which allows you to hand tighten only – and the die stays put! They include a finger adjustable floating bullet seater. For durability they are heat treated to ideal hardness and polished to the smoothest finish.

The Dillon RL 550C will produce match-quality ammo for over 160 different rifle and pistol calibers. 

These kits fit the RL300,  RL450, RL550 series, AT500 and BL 550 machines 

This kit contains: 

• Shellplate
• Powder funnel
• Locator buttons

To order choose the right caliber. 

* Indicates that this cartridge requires use of the Extra large Powder Die #21253 sold separately. 

An automatic casefeed system, similar to the one used on Dillon's commercial-grade Super 1050 machine and the XL 650, is now available for YOUR RL 550 series press! You simply dump a quart of cases into the hopper and turn it on. The motor-driven disc fills the case feed tube, a micro-switch shuts off the motor when the tube is full, and automatically restarts it when low. This case feeder only works for the handgun calibers listed under the casefeed caliber conversions. Rifle cases are too tall to feed with this system.

Sizing/Depriming Die
Our sizing/depriming dies feature a unique “floating decap assembly” with a snap spring that throws the spent primer off the pin and eliminates the problem of primer “draw back” that often occurs when decapping military brass. The primary feature of Dillon’s size die design the long, tapered carbide ring with a radiused opening remains unchanged. That radiused opening, and its importance to progressive reloading, is one of the reasons why our seat and crimp dies are better. We found a way of manufacturing these dies that has enabled us to make the lead-in radius even bigger! The bigger radius makes progressive loading with our equipment even smoother but that’s still only a part of the story.

Bullet Seating Die
Our new quick-disassembly seat die allows the user to disassemble and clean the seat die without losing adjustment. In this manner, bullet lube and shavings can be quickly removed from the die, thereby guaranteeing a constant seating depth. We’ve incorporated a “flip-flop” seating stem and a clip that enables you to remove the die insert and change the seating stem from round nose to semi-wadcutter without unscrewing a seating stem out of the die body. We’ve always included both types of seating stems, but the new double-ended design makes it a simple matter to remove a pin, reverse the seating stem, make any minor seating depth adjustments that may be necessary and go on loading in a fraction of the time it used to take.

Crimp Die
We’ve made it easy for you to remove the die insert for cleaning without having to change the critical crimp adjustment. Once your crimp die is set for the proper amount of crimp, you’ll never have to change it. This is especially good news for all of you who load lead bullets! Before, you had to unscrew the die from the toolhead and disassemble the die in order to remove any bullet lube or lead residue. Then, you had to start from square one to re-adjust the crimp. Those days are over. All you have to do now is pop a clip and the die insert drops into your hand for cleaning.

NOTE: All Dillon Pistol Die sets include our sizer/ decap die, seat die and a separate crimp die. (Taper crimp for autos; accu-crimp for revolvers.)

Dillon Precision Primer Magazine Tube Small SD / RL550/ Super 1050

The DAA Powder-Spill-Prevention (PSP) Brush is a simple yet efficient reloading accessory that solves a real issue: How to prevent small amounts of powder being spilled out of the case, as the tool head of the progressive reloading press indexes?

Rolling Handle for XL650 and RL550

Ball bearing rolling handle for effortless reloading.

Included thread lock. 

Weights in a 270 grams so you know heavy duty made to last a lifetime and thereafter.

Index Cam Bearing Block. Compatible with the current model Dillon Precision XL-650 progressive reloading press. This is a premium upgrade that smooths the action for the index cam and removes the need for grease on the index pawl. It replaces the steel block that causes friction and drag. Included is one aluminum bearing block with a sealed ball bearing.

Made from aircraft grade aluminum. Anodized in Blue color. Made with CNC precision with pride in Europe.

The DAA Powder-Spill-Prevention (PSP) Brush is a simple yet efficient reloading accessory that solves a real issue: How to prevent small amounts of powder being spilled out of the case, as the tool head of the progressive reloading press indexes?

Primer chute for spent primers replaces the blue plastic spent primer cup and bracket on the Dillon 650 reloading press. It completely covers the spent primer ejection port, creating a fully enclosed pathway for spent primers. Spent primers are routed through clear PVC tubing into plastic bottle which you fix with a holder on a strong mount. No more spent primers on floor.

Primer chute fits your dillon XL650. It is fastend with two bolts (existing). Instalation time about 1-2 minutes. Made form Aluminium. Transparent tube included. Also works great with large primers.

Included:

• Aluminum chute
• Transparent tube
• Holder for Strong Mounts
• Plastic Bottle

You may also like Armanov Strong Mounts.

Powder Baffle is a must have reloading accessory that dramatically increases powder load consistency and accuracy! 

When reloading your own ammunition it is common to produce 500 to 1,000 rounds per hour. At this rate your powder reservoir empties pretty fast. The weight of powder in the tube affects how full of a charge your bullets receive. A baffle ensures consistent weight on the powder at the bottom of the reservoir, giving you consistent loads.

This design eliminates direct weight from the powder in the powder tube reservoir to the charge bar allowing the most consistent and accurate flows. Whether the powder reservoir tube is full, half way or almost empty your averageload should be consistent. 

Powder Baffle is made from stainless steel.

Fits on Dillon Auto Powder Measure . It only takes a few seconds to drop it down into the bottom of the Dillon powder hopper. The powder hopper is not modified and your Dillon Warranty will not be effected.

Mounts directly to Strong Mount. Fits the Square Deal, RL550 series and XL650 strong mounts. For 1050 machines use #22215. You must have a strongmount in order to use this bullet tray.