Select brand
 
Brand

ADVANCED SEARCH

Reloading equipment

18.84  

Dillon Precision Primer Magazine Tube Small SD/550/650/750/1050/1100.

NOTE:

  • 14024 is only one plastic end piece.
  • 22030 comes in a set of 1 magazine tube and 2 plastic end pieces.

465.41  

Dillon's RF 100 Automatic Primer Filler eliminates the task of filling primer pick up tubes. 


In stock
+

137.87  
In stock
+

14.71  

The DAA Powder-Spill-Prevention (PSP) Brush is a simple yet efficient reloading accessory that solves a real issue: How to prevent small amounts of powder being spilled out of the case, as the tool head of the progressive reloading press indexes?

In stock
+

102.46  

The Mini Mr.Bulletfeeder by DAA uses a 6-tube magazine system which holds roughly 100 bullets. It feeds into the same brilliantly reliable dropper die assembly as used on the Mr.Bulletfeeder.

In stock
+

12.79  

This spacer for Dillon case feeder allows you quickly rise your case feeder plate without clutch system disassembly.

In stock
+

40.90  

Rolling Handle for XL650/750 and RL550.

In stock
+

10.57  

Free Float Lock Ring for Dillon Toolhead allow the sizer and seater dies to float. This floating action allows the dies to center themselves exactly over each cartridge for the best possible alignment and more concentric ammunition. This free float lock ring will only fit with free float toolheads for Dillon XL650 / XL750 or RL550..

In stock
+

16.31  

This is a premium upgrade that smooths the action for the index cam and removes the need for grease on the index pawl. Armanov Index Bearing Cam Block for Dillon Precision XL650 replaces the steel block that causes friction and drag.

In stock
+

14.71  

The DAA Powder-Spill-Prevention (PSP) Brush is a simple yet efficient reloading accessory that solves a real issue: How to prevent small amounts of powder being spilled out of the case, as the tool head of the progressive reloading press indexes?

In stock
+

24.51  

Primer chute for spent primers replaces the blue plastic spent primer cup and bracket on the Dillon XL650/750 reloading press. It completely covers the spent primer ejection port, creating a fully enclosed pathway for spent primers. Spent primers are routed through clear PVC tubing into plastic bottle which you fix with a holder on a strong mount. No more spent primers on floor.

In stock
+

2,454.92  

Mark 7® 650 PRO Autodrive

Differentiating Features  

  • Includes the Mark 7 Optical Decapping Sensor - a $200 value !
  • Completely compatible with Mr. Bulletfeeder and GSI bulletfeeders
  • Broad caliber capacity - able to load a wider array of calibers including larger rifle calibers
  • Small footprint
  • Digital clutch - adjustable on-the-fly from 0 to 20
  • Digital primer depth setting - no more guessing !
  • Digital jog and immediate stop
  • Microprocessor monitored and controlled
  • Includes pre-loaded computer tablet - no control boxes!
  • Features monitored by computer
  • Downloadable software upgrades for life
  • Supports a variety of accessories
  • User-configurable Dwell time at the top of the stroke as well as the bottom
  • Easy Installation
  • Pre-assembled and shipped ready to use
  • CNC grade planetary gearbox
  • Full warranty
  • High torque motor - same available torque to machine as the 1050 X Autodrive
  • Fully Supports International Voltage - this unit operates at 110/220v and at 50/60 Hz with no appreciable variation in speed or performance

 

Dimensions and Capacity

  • Overall machine dimensions are 49" tall (124.4 cm) X 14" (35.5cm) wide x 12" (30.5cm) deep x 1/2" (1.27cm) thick
  • True operational height: earlier machines 52.5", later machines 48.5"
  • User selectable speeds from 900 to 1,800 rounds per hour
  • Quite operation approximately at 75-80 dB including case and bullet feeder

 

650 Autodrive Specifics

  • CNC billet heavy-duty crank
  • High torque output
  • Mounted on heavy-duty baseplate
  • In-line direct-drive operation helps ensure equal amounts of pressure applied to the 650 ram/operation
  • Does not include the Dillon Precision XL650 reloading press
  • Completely compatible with the leading bullet feeders on the market
In stock
+

11.39  

Powder Baffle for Dillon is a must have reloading accessory that dramatically increases powder load consistency and accuracy! 

In stock
+

61.47  

Mounts directly to Strong Mount. Fits the Square Deal, RL550 series and XL650 strong mounts. For 1050 machines use #22215. You must have a strongmount in order to use this bullet tray.


36.84  

An additional 6-tube Magazine Assembly for your Mini XL650 Case Feeder. It will hold about 150 pcs of 9mm brass, 130 pcs of .40 and about 120 pcs of .38S.

In stock
+


9.47  

Dillon Square Deal B Primer slide bearing.


2.45  
In stock
+

26.64  

Carbide sizing die 9MM Luger Carbide Full Length only. No case lube needed.


8.16  
In stock
+



22.95  
In stock
+

6.56  

Lee Replacement decapping pin for Decapping Die (#90292)


19.67  

When you need to pull some bullets for whatever reason, and impact style tool is the easiest method. Just one stern “whack” and the bullet is separated from the brass. It is that easy. Three different collets are included allowing you to pull bullets  from just about every caliber rimmed or rimless. Versatility makes this bullet puller the only one to have.


56.56  

Spare parts kit specifically for your Super 1050 machine keeps your machine running also when you had a little accident. Don't risk downtime waiting for a replacement parts! Contains everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Includes the spare parts kit for your machine.


40.70  

Spare parts kit specifically for your RL550 machine keeps your machine running also when you had a little accident. Don't risk downtime waiting for a replacement parts! Contains everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Includes the spare parts kit for your machine.

In stock
+

106.56  

Comes with powder check die and 3 check rods which are from .22 till .45 Cal. Battery AAA is included. 

In stock
+

253.50  
In stock
+



103.77  

Mount height = 8 1/2"  or 21,6 centimeters. Raises your press above the work bench level and adds stability due to its larger footprint.

In stock
+

10.65  
In stock
+


409.02  

Super 1050 Quick Change Kits allows you to leave your dies and powder charge set up and dedicated to a specific cartridge for faster, easier caliber changes.  Caliber changes require a caliber conversion kit (sold separately) in the caliber you want to add to your Dillon Super 1050. 

In stock
+

57.37  

No downtime with Dillon XL650 Spare Parts Set! This set includes everything you need to keep your XL650 operational, no more downtime, no more waiting for parts!


53.28  

Dillon shell plate for case feeder.

In stock
+

122.13  
In stock
+

131.14  
In stock
+

27.86  
In stock
+

49.17  

Dillon X-Small Powder Bar for extra small gunpowder quantities.

In stock
+

47.53  

Don't risk downtime waiting for a replacement part! Dillon Precision Spare Parts Kits keep your machine running while you wait for your replacement parts to arrive in the mail.

In stock
+

58.08  

Don't risk downtime waiting for a replacement part!  Dillon Precision Spare Parts Kits keep your machine running without waiting for replacement parts to arrive in the mail.

In stock
+

187.71  
In stock
+

40.98  

Allows you to focus on loading instead of worrying about failing to seat a primer, and is an easy slip-on attachment to the auto prime system.


113.61  
In stock
+

61.47  
Dillon's accessory handle gives your reloader an entirely new "feel." A roller handle reduces operator fatigue during long reloading sessions and makes primer seating easier. Fits the RL550, XL65/750 loaders

31.24  

Mistakes happen, so be prepared. Our hammer-style Bullet Puller quickly removes your bullets without damaging the bullet or the case. The rubberized grip is easy on your hands and we have also added a rubber insert inside the hammer tip to make it easy on your bullets. Easy and convenient to use whether checking an occasional  reload or pulling hundreds of bullets.


21.80  
Extra powder dies allow you to move your powder measure from toolhead to toolhead without changing the "belling" adjustment.  Toolhead not included . These are for the RL550, XL650, XL750 and RL450 equipped with the automatic powder system.

605.74  

The Dillon Square Deal B is a compact reloading machine designed to load the common straight walled handgun and carbine cartridges from 32 S&W Long through 45 Colt. The Square Deal B, which is our most compact machine, has an automatically indexed shellplate and is intended to produce moderate quantities of match-quality handgun ammunition for the user who does not have a need to load bottle-necked cartridges. Dies are included and are factory adjusted to reduce your set up time.

In stock
+

36.88  

Don't risk downtime waiting for a replacement part! Dillon Precision Spare Parts Kits keep your machine running while you wait for your replacement parts to arrive in the mail.


56.56  
In stock
+

28.68  
This die allows you to leave the funnel set up in your toolhead for quicker, easier caliber changes.
In stock
+

49.92  

Dillon sizing/depriming dies feature a unique "floating decap assembly" with a snap spring that throws the spent primer off the pin and eliminates the problem of primer "draw back" that often occurs when decapping military brass.

In stock
+

32.78  

The ultimate in convenience for keeping your reloading bench clean and uncluttered. You will find in an instant what you need to make the switch from one to another caliber. 

In stock
+

3.27  

Locator Buttons are sold individually. Adjust the quantity if you need more than one. For 550, 650, 750, 1050 and Square Deal machines.


7.57  
In stock
+

9.47  
In stock
+

4.91  
In stock
+

7.57  
In stock
+


36.03  

Don't Adjust dies when switching calibers. These Precision tool holders hold your dies in perfect alignment, making caliber changes quick and easy. 

In stock
+

14.20  
In stock
+

11.47  
In stock
+



32.78  

The Dillon metal primer flip tray makes it easy to fill primer pick-up tubes. The heavier metal tray makes it less likely for primers to bounce over while filling, and the larger diameter of our tray allows use of larger primer packaging, such as used by Federal.

In stock
+

14.20  

This bin is 260mm long, 110mm wide by 120mm deep and is great for storing just about anything.

In stock
+

24.58  
In stock
+

40.98  

This heavy-duty nylon cover comes equipped with a D-ring, allowing the zipper to be locked. 

If you have a Mr. Bulletfeeder mounted onto your 1050, this cover will still cover the machine, but you must orient the cover so that the zipper is on the LEFT side, not the back. 

In stock
+

22.13  

Powder funnels to activate the Dillon automatic powder system. 

Funnels labelled "oversize"require the separate XL Powder Die #21253 

Order from the drop down menu below. 

In stock
+

14.20  
In stock
+

42.60  
In stock
+

31.14  

This unit includes the complete allen wrench set, for Dillon XL650/750, RL550.

In stock
+

49.17  

Dillon's new tool holder fits your RL 550 machine and ensures that the tools you need to service your reloader are handy and organized. No more digging around your bench trying to find the right size hex wrench! This unit includes the complete allen wrench set plus the one inch bench wrench.

In stock
+

34.39  
In stock
+

45.82  

This packcloth nylon machine cover comes equipped with a D-ring, allowing the heavy-duty zipper to be locked.

In stock
+

57.37  

These lighter weight Aluminum toolheads are machined from billet using the same precise CNC machining as our standard toolheads. Available in four different colors to allow you to quickly differentiate between calibers or load types.


20.41  

Armanov Quick Disconnect replaces original Dillon Powder Measure half-ring retention.

In stock
+

69.66  

Designed for economy of motion when loading. Our new bullet tray is made of durable cast aluminum and is powder coated Dillon Blue. Fits RL 1050 / Super 1050.

In stock
+

28.61  

Powder measure knob for the Dillon Powder thrower with click for easy adjustment. Unlike other competitors, this knob is laser etched with 50 graduations giving the user reference points when adjusting. Two steel spring loaded balls generate smooth and repetable clicks. Easy to setup between multiple loads or even calibres, very precise 50 clicks per turn. 

In stock
+

172.12  

With a quick change assembly and a caliber conversion kit (sold separately), you can convert your RL 550 Series press from one caliber to another in less than a minute. 


Includes: 

  • Powder measure
  • Powder die
  • Toolhead 
  • Toolhead stand

638.53  

The Dillon RL550C is the most versatile reloading machine in the Dillon Precision Products line.  It will accommodate the widest variety of cartridges from 32 ACP up to 338 Lapua, 416 Rigby, and 460 Weatherby.

The RL550 has a manually indexed shellplate making it easier to master the various steps of reloading. Manual indexing also gives the operator greater control over each individual step in the loading process. Caliber changes are simple and require fewer parts than other machines which makes it less expensive to convert to another cartridge.

Reloading with Dillon’s RL 550 is Easy as 1-2-3!

Most shooters realize that reloading is the most economical way to enjoy their sport, but many shooters are unaware of just how simple it is to reload. In fact, Dillon’s RL 550C is the easiest progressive loader in the world to learn to reload with. How can we make that statement? Simple. Since all of the reloading steps are performed with a stroke of the handle, there is less to remember (or forget) than with an old-fashioned single-station press.


No dies are included with the RL550!

In stock
+

28.68  
In stock
+

24.55  
The Output tube assembly is what connects the Mr. Bulletfeeder by DAA’s collator to the dropper. It feeds the bullets into the dropper, keeping them inline and feeding smoothly. It consists of 3 parts: - The collator output Tube - The coiled feed spring (38cm long) - The dropper spring cap...
In stock
+

114.75  

Increase the stability of your reloading bench with Dillon's new Strong Mounts. These heavy gauge steel Strong Mounts increase the machine's "foot-print" to over 10", spreading the load over the bench instead of stressing the leading edge. 

In stock
+

204.10  

Quickly and easily convert your Square Deal B from one cartridge to another with the Square Deal B Quick Change and a Caliber Conversion Kit, sold separately.

Kit Includes:

  • Toolhead
  • Toolhead Stand
  • Powder Measure
  • Powder Die
In stock
+

40.98  

The Dillon Precision Universal Decapping Die is a standard 7/8"-14 die with a solid, hardened steel, decapping pin in an unlined steel die body.  The Universal Decapping Die allows you to remove spent primers without any resizing of the brass. 

  • Works with all standard pistol and rifle cartridge sizes from 22 through 45. 
  • Allows you to remove spent primers prior to trimming with our RT1500 Electric Case Trimmer.
  • The Universal Decapping die allows brass to be deprimed prior to cleaning when processing brass.  Cleaner primer pockets help to maintain consistent primer seating depth and ignition.
  • The Universal Decapping die works in all machines that accept standard 7/8"-14 dies.

40.98  

Dillon's new Toolholder fits your Square Deal B and ensures that the tools you need to service your reloader are handy and organized. No more digging around your bench trying to find the right size hex wrench! This unit includes the complete allen wrench set plus the new Square Deal bench wrench.


37.87  

The Dillon Magnum Rifle Powder bar throws charge weights from 50 grains up to approximately 72 grains of extruded powder, or up to approximately 82 grains of ball/spherical powder

In stock
+

48.35  

Dillon's new Toolholder fits your XL650/750 and ensures that the tools you need to service your reloader are handy and organized. No more digging around your bench trying to find the right size hex wrench! This unit includes a complete allen wrench set plus the one inch bench wrench.

In stock
+

7.75  

Includes: 4-Grade 5 Hex Bolts, 4- Nuts, 4 Flat Washers, 4-Fender Washers, 2-Wood Screws.

In stock
+

8.77  
In stock
+

22.94  

A characteristic of virtually all progressive reloading machines, regardless of brand, is that the dies are set rather close together. When you are first setting up a "naked" machine, there is plenty of wrench room, but if you have a need to adjust a die afterward, it often requires a delicate touch to maneuver a lock ring on a crowded toolhead. 
Dillon Precision has addressed this in two ways. We now offer new 1" die lock rings and a 1" Bench Wrench to fit them. This combination gives much more room to re-adjust dies after they're already mounted. The opposite end of our new wrench is a 7/16" box-end for adjusting the Powder Bar of any Dillon Powder Measure. Our new lock rings fit any standard 7/8" x 14 dies.


33.57  
Dillon's Plan B Day Planner Holster holds a handgun and a spare magazine or pepper spray, yet it fits in with business clothing and won't draw undue attention. It looks like a typical day planner, but inside there's a holster that's adaptable for either right-or left-handed draw. It fits most...
In stock
+

18.03  

he DAA Output Chute can be attached to any reloading press, hanging onto the same bracket which usually holds the Akro-Bin, and replacing it.

The long, 120cm (4ft) feed spring enables you to run the ammo down to a container on the floor, sparing you the need to empty that bin as you reload, and uncluttering your reloading press.

In stock
+
1 2 3