Équipement de rechargement

Dillon Precision Primer Magazine Tube Small SD / RL550/ Super 1050

Dillon's RF 100 Automatic Primer Filler eliminates the task of filling primer pick up tubes. Now you simply pour your primers from their box into the top, press the blue button and watch it run!No need to purchase additional primer pickup tubes.

In about two minutes the primers are inside the protective metal housing. In that time you have already loaded 30 rounds, the RF 100 is doing the work for you.

The RF 100 is available for either large or small primers, and conversion kits are available.

The DAA Powder-Spill-Prevention (PSP) Brush is a simple yet efficient reloading accessory that solves a real issue: How to prevent small amounts of powder being spilled out of the case, as the tool head of the progressive reloading press indexes?

Easy to setup Drop-in spacer for Dillon case feeder

This spacer for Dillon case feeder allows you quickly rise your case feeder plate without clutch system disassembly. Just put it on casefeeder and insert plate above spacer. You will get 1/4 inch rise (6,35mm). This can be used for longer pistol cases that turn over. Or short rifle cases such .300 AAC Blackout with Large pistol plate.

Rolling Handle for XL650 and RL550

Ball bearing rolling handle for effortless reloading.

Included thread lock. 

Weights in a 270 grams so you know heavy duty made to last a lifetime and thereafter.

Index Cam Bearing Block. Compatible with the current model Dillon Precision XL-650 progressive reloading press. This is a premium upgrade that smooths the action for the index cam and removes the need for grease on the index pawl. It replaces the steel block that causes friction and drag. Included is one aluminum bearing block with a sealed ball bearing.

Made from aircraft grade aluminum. Anodized in Blue color. Made with CNC precision with pride in Europe.

The DAA Powder-Spill-Prevention (PSP) Brush is a simple yet efficient reloading accessory that solves a real issue: How to prevent small amounts of powder being spilled out of the case, as the tool head of the progressive reloading press indexes?

Primer chute for spent primers replaces the blue plastic spent primer cup and bracket on the Dillon 650 reloading press. It completely covers the spent primer ejection port, creating a fully enclosed pathway for spent primers. Spent primers are routed through clear PVC tubing into plastic bottle which you fix with a holder on a strong mount. No more spent primers on floor.

Primer chute fits your dillon XL650. It is fastend with two bolts (existing). Instalation time about 1-2 minutes. Made form Aluminium. Transparent tube included. Also works great with large primers.

Included:

• Aluminum chute
• Transparent tube
• Holder for Strong Mounts
• Plastic Bottle

You may also like Armanov Strong Mounts.

Mark 7® 650 PRO Autodrive

Differentiating Features  

• Includes the Mark 7 Optical Decapping Sensor - a $200 value !
• Completely compatible with Mr. Bulletfeeder and GSI bulletfeeders
• Broad caliber capacity - able to load a wider array of calibers including larger rifle calibers
• Small footprint
• Digital clutch - adjustable on-the-fly from 0 to 20
• Digital primer depth setting - no more guessing !
• Digital jog and immediate stop
• Microprocessor monitored and controlled
• Includes pre-loaded computer tablet - no control boxes!
• Features monitored by computer
• Downloadable software upgrades for life
• Supports a variety of accessories
• User-configurable Dwell time at the top of the stroke as well as the bottom
• Easy Installation
• Pre-assembled and shipped ready to use
• CNC grade planetary gearbox
• Full warranty
• High torque motor - same available torque to machine as the 1050 X Autodrive
• Fully Supports International Voltage - this unit operates at 110/220v and at 50/60 Hz with no appreciable variation in speed or performance

Dimensions and Capacity

• Overall machine dimensions are 49" tall (124.4 cm) X 14" (35.5cm) wide x 12" (30.5cm) deep x 1/2" (1.27cm) thick
• True operational height: earlier machines 52.5", later machines 48.5"
• User selectable speeds from 900 to 1,800 rounds per hour
• Quite operation approximately at 75-80 dB including case and bullet feeder

650 Autodrive Specifics

• CNC billet heavy-duty crank
• High torque output
• Mounted on heavy-duty baseplate
• In-line direct-drive operation helps ensure equal amounts of pressure applied to the 650 ram/operation
• Does not include the Dillon Precision XL650 reloading press
• Completely compatible with the leading bullet feeders on the market

Powder Baffle is a must have reloading accessory that dramatically increases powder load consistency and accuracy! 

When reloading your own ammunition it is common to produce 500 to 1,000 rounds per hour. At this rate your powder reservoir empties pretty fast. The weight of powder in the tube affects how full of a charge your bullets receive. A baffle ensures consistent weight on the powder at the bottom of the reservoir, giving you consistent loads.

This design eliminates direct weight from the powder in the powder tube reservoir to the charge bar allowing the most consistent and accurate flows. Whether the powder reservoir tube is full, half way or almost empty your averageload should be consistent. 

Powder Baffle is made from stainless steel.

Fits on Dillon Auto Powder Measure . It only takes a few seconds to drop it down into the bottom of the Dillon powder hopper. The powder hopper is not modified and your Dillon Warranty will not be effected.

Mounts directly to Strong Mount. Fits the Square Deal, RL550 series and XL650 strong mounts. For 1050 machines use #22215. You must have a strongmount in order to use this bullet tray.

An additional 6-tube Magazine Assembly for your Mini XL650 Case Feeder.

It will hold about 150 pcs of 9mm brass, 130 pcs of .40 and about 120 pcs of .38S.

Tip:

- When filling the tubes, rotate the base of the assembly so that it is positioned between tubes- that way none of the columns line up with the hole in the bottom – and the brass won’t fall out prematurely.

Rev B seater assembly small.  #21381

Dillon Square Deal B Primer slide bearing #13722

Spent primer catcher pin #13998

Carbide sizing die 9MM Luger Carbide Full Length only. No case lube needed.

Lee Replacement decapping pin for Decapping Die (#90292)

When you need to pull some bullets for whatever reason, and impact style tool is the easiest method. Just one stern “whack” and the bullet is separated from the brass. It is that easy. Three different collets are included allowing you to pull bullets  from just about every caliber rimmed or rimless. Versatility makes this bullet puller the only one to have.

To keep your machine running also when you had a little accident.

Spare parts kit specifically for your Super 1050 machine.

Don't risk downtime waiting for a replacement parts!

Everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Includes the spare parts kit for your machine.

Note : The aerosol inside makes it impossible to ship this by air.

Everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Includes the spare parts kit for your machine.
Note : The aerosol inside makes it impossible to ship this by air.

Comes with powder check die and 3 check rods which are from .22 till .45 Cal. Battery AAA is included.

This item does not check the accuracy of the powder charge, it checks for double-charges or no-charges only.

Dillon powder body with drop tube #22273

This mount is for both the RL 550 series presses as well as the XL650.  Mount height = 8 1/2"  or 21,6 centimeters.

Raises your press above the work bench level and adds stability due to its larger footprint.

Recommended by lots of reloaders.

Caliber conversion is not included.

Super 1050 Quick Change Kits allows you to leave your dies and powder charge set up and dedicated to a specific cartridge for faster, easier caliber changes.  Caliber changes require a caliber conversion kit (sold separately) in the caliber you want to add to your Dillon Super 1050.

This set consists of one Super 1050 powder measure nr. 20421 and one Super 1050 Toolhead nr. 20420. 

Be aware that the ratchet does not interchange between the Super 1050 and the RL1050 due to differences in length. 
If you have an RL1050, order toolhead #19399.

To keep your machine running also when you had a little accident.

Spare parts kit specifically for your XL650 machine.

Don't risk downtime waiting for a replacement parts!

Small Pistol .32, .380, 9mm, .38 Super, .30 Carbine

Large Pistol .40 S&W, 10 mm, .38 Special and larger, 7.62 x 39

Small Rifle .204 Ruger, .222, .223 Remington

Large Rifle .22-250 and larger

Don't risk downtime waiting for a replacement parts!

Don't risk downtime waiting for a replacement parts!

To keep your machine running also when you had a little accident.

Spare parts kit specifically for your Super 1050 machine.

Dillon's accessory handle gives your reloader an entirely new "feel." 
A roller handle reduces operator fatigue during long reloading sessions and makes primer seating easier. Fits the RL550 and XL650 loaders. 

Mistakes happen, so be prepared. Our hammer-style Bullet Puller quickly removes your bullets without damaging the bullet or the case. The rubberized grip is easy on your hands and we have also added a rubber insert inside the hammer tip to make it easy on your bullets. Easy and convenient to use whether checking an occasional  reload or pulling hundreds of bullets.

This Hammer Set comes with 4 collets.

LIFETIME WARRANTY.  MADE IN THE USA.

Collet information:
                                        Pistol                                      Rifle
Black (X-Small) -    .25 ACP                        Small Rifle Calibers
Blue (Small) -           .32 - .380                      17 Rem - 223 Rem
Green (Large) -       9mm - 10mm                       6mm - 8mm    
Red (X-Large) -      .41 - .45 ACP                  Belted Mags - 45-70