Sélectionnez la marque
 
Marque

Napredno iskanje

Équipement de rechargement

36.88  

Don't risk downtime waiting for a replacement parts!

Includes: 1 550 Brass Tip Set Screw, 1 550 Index Ball, 1 550 Index Ball Spring, 1 Seating Punch (Small), 1 Seating Punch (Large), 1 550 Primer Cup Spring, 1 550 Slide Return Spring, 1 Cartridge Spring, 1 Bellcrank Cube, 2 Magazine Orifices (small), 2 Magazine Orifices (large), 2 Pickup Tube (Large, Green tips), 2 Pickup Tubes (Small, Yellow Tips), 2 pickup tube retaining Clips, 1 Failsafe Shoulder Washer, 1 Tinnerman Insert, 4 Locator Pins(one each #s 1,2,3,4), 1 primer cup (small), 1 primer cup (large), 1 ejector wire, 1 toolhead pin, 1 dispensing tip (Large), 1 dispensing tip (Small), spacer bar retaining plug 


56.56  
En stock
+

28.68  
En stock
+

49.92  

Sizing/Depriming Die 
Our sizing/depriming dies feature a unique "floating decap assembly" with a snap spring that throws the spent primer off the pin and eliminates the problem of primer "draw back" that often occurs when decapping military brass. The primary feature of Dillon's size die design the long, tapered carbide ring with a radiused opening remains unchanged. 
That radiused opening, and its importance to progressive reloading, is one of the reasons why our seat and crimp dies are better. We found a way of manufacturing these dies that has enabled us to make the lead-in radius even bigger! The bigger radius makes progressive loading with our equipment even smoother but that's still only a part of the story. 

En stock
+

32.78  

The ultimate in convenience for keeping your reloading bench clean and uncluttered. You will find in an instant what you need to make the switch from one to another caliber.  

This stand is for the RL550 Series and XL650 machines only.

En stock
+


7.57  
En stock
+

9.47  
En stock
+

4.91  

Collar sleeve Sqare deal B

En stock
+

7.57  
En stock
+


36.03  

Don't Adjust dies when switching calibers. These Precision tool holders hold your dies in perfect alignment, making caliber changes quick and easy. 

En stock
+

14.20  
En stock
+

11.47  
En stock
+



32.78  

The Dillon metal primer flip tray makes it easy to fill primer pick-up tubes. The heavier metal tray makes it less likely for primers to bounce over while filling, and the larger diameter of our tray allows use of larger primer packaging, such as used by Federal.

En stock
+

14.20  

The Dillon RL 1050 Cartridge Bin is used on the Super 1050 progressive reloading machine to catch the loaded cartridges. This bin is 260mm long, 110mm wide by 120mm deep and is great for storing just about anything.

Dillon's blue AkroBins are made of virtually unbreakable heavy-duty polypropylene. They're unaffected by weak acids and alkalis and are also water, rust and corrosion proof. They are great for reloaders requiring extra capacity, or those loading several calibers, bullet weights, bullet shapes, etc. AkroBins can be used for storing almost anything!

En stock
+

24.58  
En stock
+

40.98  

This heavy-duty nylon cover comes equipped with a D-ring, allowing the zipper to be locked. 

If you have a Mr. Bulletfeeder mounted onto your 1050, this cover will still cover the machine, but you must orient the cover so that the zipper is on the LEFT side, not the back. 

En stock
+

22.13  

Powder funnels to activate the Dillon automatic powder system. 

Funnels labelled "oversize"require the separate XL Powder Die #21253 

Order from the drop down menu below. 

En stock
+

14.20  
En stock
+

42.60  
En stock
+

31.14  

This unit includes the complete allen wrench set 

En stock
+

49.17  
En stock
+

34.39  
En stock
+

45.82  

This packcloth nylon machine cover comes equipped with a D-ring, allowing the heavy-duty zipper to be locked.Covers XL650 with or without the case feeder attached. Additionally, use this cover for the RL550 when equipped with the optional handgun caliber case feeder. 

If you have an XL650 equipped with a Mr. Bulletfeeder, use the 1050 cover. 

En stock
+

57.37  

These lighter weight Aluminum toolheads are machined from billet using the same precise CNC machining as our standard toolheads. Available in four different colors to allow you to quickly differentiate between calibers or load types.


20.41  
En stock
+

69.66  
En stock
+

28.61  

Powder measure knob for the Dillon Powder thrower with click for easy adjustment.

Unlike other competitors, this knob is laser etched with 50 graduations giving the user reference points when adjusting. Two steel spring loaded balls generate smooth and repetable clicks. Easy to setup between multiple loads or even calibres, very precise 50 clicks per turn. Testing on pistol powders one click increments is about 0.015 grains. This is a very precise setting. 

Simple installment and a tremendous help for if you are using different loads with visual scale.

The Dillon Factory screw requires a wrench when adjusting the amount of powder to dispense in your powder thrower. This knob is labeled with graduations for orientation and easily allows the user to hand adjust the powder dispenser without the need for tools. Works on Dillon 1050, 650,550, SDB and 900 presses.

Both parts are made from aircraft grade aluminum - anodized black color

1 x laser etched knob assembly consisting of one knob frame and one adjusting knob

1 x allen wrench for the grub-screws to fasten

Dillon Powder Bar shown only for reference and is NOT included.

 

En stock
+

172.12  

With a quick change assembly and a caliber conversion kit (sold separately), you can convert your RL 550 Series press from one caliber to another in less than a minute. 


Includes: 

  • Powder measure
  • Powder die
  • Toolhead 
  • Toolhead stand

638.53  

The Dillon RL550C is the most versatile reloading machine in the Dillon Precision Products line.  It will accommodate the widest variety of cartridges from 32 ACP up to 338 Lapua, 416 Rigby, and 460 Weatherby.

The RL550 has a manually indexed shellplate making it easier to master the various steps of reloading. Manual indexing also gives the operator greater control over each individual step in the loading process. Caliber changes are simple and require fewer parts than other machines which makes it less expensive to convert to another cartridge.

Reloading with Dillon’s RL 550 is Easy as 1-2-3!

Most shooters realize that reloading is the most economical way to enjoy their sport, but many shooters are unaware of just how simple it is to reload. In fact, Dillon’s RL 550C is the easiest progressive loader in the world to learn to reload with. How can we make that statement? Simple. Since all of the reloading steps are performed with a stroke of the handle, there is less to remember (or forget) than with an old-fashioned single-station press.


No dies are included with the RL550!

En stock
+

28.68  
En stock
+

24.55  
En stock
+

114.75  

Increase the stability of your reloading bench with Dillon's new Strong Mounts. These heavy gauge steel Strong Mounts increase the machine's "foot-print" to over 10", spreading the load over the bench instead of stressing the leading edge. 
Strong Mounts raise your machine 8", providing a comfortable work height for people who prefer to stand while reloading. 
All mounts come with all the fasteners necessary to mount your machine and are coated with a durable black wrinkle finish.

En stock
+

204.10  
En stock
+

40.98  

The Dillon Precision Universal Decapping Die is a standard 7/8"-14 die with a solid, hardened steel, decapping pin in an unlined steel die body.  The Universal Decapping Die allows you to remove spent primers without any resizing of the brass. 

  • Works with all standard pistol and rifle cartridge sizes from 22 through 45. 
  • Allows you to remove spent primers prior to trimming with our RT1500 Electric Case Trimmer.
  • The Universal Decapping die allows brass to be deprimed prior to cleaning when processing brass.  Cleaner primer pockets help to maintain consistent primer seating depth and ignition.
  • The Universal Decapping die works in all machines that accept standard 7/8"-14 dies.

40.98  

Dillon's new Toolholder fits your Square Deal B and ensures that the tools you need to service your reloader are handy and organized. No more digging around your bench trying to find the right size hex wrench! This unit includes the complete allen wrench set plus the new Square Deal bench wrench.


37.87  

The Dillon Magnum Rifle Powder bar throws charge weights from 50 grains up to approximately 72 grains of extruded powder, or up to approximately 82 grains of ball/spherical powder

En stock
+

48.35  

Dillon's new Toolholder fits your XL 650 and ensures that the tools you need to service your reloader are handy and organized. No more digging around your bench trying to find the right size hex wrench! This unit includes a complete allen wrench set plus the one inch bench wrench.

En stock
+

7.75  
En stock
+

8.77  
En stock
+

22.94  

A characteristic of virtually all progressive reloading machines, regardless of brand, is that the dies are set rather close together. When you are first setting up a "naked" machine, there is plenty of wrench room, but if you have a need to adjust a die afterward, it often requires a delicate touch to maneuver a lock ring on a crowded toolhead. 
Dillon Precision has addressed this in two ways. We now offer new 1" die lock rings and a 1" Bench Wrench to fit them. This combination gives much more room to re-adjust dies after they're already mounted. The opposite end of our new wrench is a 7/16" box-end for adjusting the Powder Bar of any Dillon Powder Measure. Our new lock rings fit any standard 7/8" x 14 dies.


33.57  
En stock
+

18.03  

he DAA Output Chute can be attached to any reloading press, hanging onto the same bracket which usually holds the Akro-Bin, and replacing it.

The long, 120cm (4ft) feed spring enables you to run the ammo down to a container on the floor, sparing you the need to empty that bin as you reload, and uncluttering your reloading press.

En stock
+

7.79  

Some Mr.BulletFeeder users have asked for the option to extend the output feed spring, to allow them to position the collator further away, or perhaps position one collator between two presses and use it to alternately feed each machine.

To meet this request we are pleased to offer the output springs and a screw-on adaptor cap which will allow you to attach to your current spring and extend it up to another 38cm.

 Two sizes are available. The Small (10mm inner diameter) matches the springs used with the rifle caliber machinesand the large size (12mm inner diameter) as shipped with the pistol calibers.

 Note that some “do it yourself” supports for the spring will be needed to prevent it sagging under the weight of the bullets. You do need to keep the tube running downwards and prevent bullets from “pooling” in a sagging loop.

En stock
+

24.55  

The 2018 Hanger Assembly for the Mr.Bulletfeeder by DAA ships as standard with all new units leaving DAA as of Jan 2018.

Should you wish to upgrade your current hanger assembly (the one with the round Delrin pucks and aluminum rods) you can do so by purchasing this new hanger separately. It is reverse-compatible with all previous Mr.Bulletfeeder by DAA units.

The new hanger is a simplified design, which makes assembly and adjustments to the tilt angle easier and faster to make. The Horizontal aluminum bracket clamps directly onto the motor gear box, allowing for easy assembly on either the left or the right side of the collator, to accommodate your specific position mounting needs.

The vertical piece hangs over the side of your case feeder, and connects to the horizontal bracket by means of a large M8 bolt, which can be loosened and rotated for tilt adjustments.

Sturdy attachment to the collator, a simplified design with fewer parts, thick aluminum profiles and way fewer screws make this hanger simpler and easier to setup and adjust.

Note: Machine NOT included - only Hanger. 

En stock
+
1 2 3 4 5