Reloading equipment

Kit contains QTY 5 of 301-1178 Shell plate springs 0.094" Dia, 0.018" Wire Dia, 302 SS cut to approximate length.

Also contains QTY 2 1" sections of 201-1210 Case Retention Spring 0.125" OD, 0.02" Wire Dia

Bushings are made for a quick, simple and precise change of dies in the toolhead. No need for a complete toolhead change anymore, just twist and replace any bushing with the die of your choice. Change six dies on a Dillon Super 1050 / RL 1100 in seconds!

Primer Stop Block for Dillon Precision XL750 Progressive Reloading Press. Comes very useful for operations when no primer insertion is required. The block prevents movement of the primer slide bar. Super simple installation by simply inserting the block between the pin on the slide and primer feed body. When not in use attach it to the steel primer tube by the magnet

The DAA Primer Pickup Tubes are made of the highest quality aluminum, produced using custom-made extrusion tools and tightly controlled for accuracy and finish. Close attention is paid to the consistency of the internal and external chamfering to ensure optimal feeding. The matt-finish anodizing makes identifying the primer size immediate, while giving these tubes a striking attractive look.

Since we introduced our DAA Turbo Case-Feeder Plate for the Dillon case feeders, we’ve had Mark-7 customers asking us if they could use it with their High Speed 11” Mark7 case feeder (as supplied with the Apex-10 press). The answer is YES! The disk is the same size and it works great in the excellent Mark-7 case feeder. 

The DAA Infra-Red Low Powder Sensor is an efficient, high-tech solution to a problem every reloader has encountered: Making sure to fill that powder hopper in time, before you accidently load empty cases without powder… (don’t feel stupid, we’ve all done it…)

This enhanced heat-treated toolhead washer and hex key bolt reduces any flexing of your toolhead, increasing the rigidity and potentially the consistency of your ammunition. This works on the RL1050 and Super 1050 as well as the RL1100 loader. Requires a 1/2" hew key wrench to install and remove the bolt.

If primer does not explode when hit by firing pin then most common reason is that primer is not seated deep enough. This problem is quite common in new XL750 since orginal primer punch spring is a little to long and primers are not seated deep enough. Armanov solution to this problem is new Index Cam Block with integrated ball bearing and adjustable primer seating depth stop.

Conversion kits are available allowing you to use your Mr. Bulletfeeder by Double-Alpha for more than just one caliber. Many reloaders have a second complete tool head for their 2nd caliber of choice, voiding the need to reset the dies. To make the transition easy, the Mr. Bulletfeeder by Double-Alpha conversion kits includes a complete dropper assembly, a custom powder funnel (for pistol calibers) and a new collator plate for the caliber of choice. This will allow you to switch your bullet feeder from one caliber to the next in a matter of minutes. 

Powder Funnel for activating the Dillon automatic powder system. An essential component for reloading 9 mm family of calibers with any bullet-feeder system with your Dillon powder measure. It prepares the brass correctly so that the bullet can be seated in the case, and not tip over as you index the shell plate.

Install by slipping this on the top back side of your case feeder and fits to the Dillon Case feeder 550 / 650 / 750 / 1050 / 1100 or Hornady LNL AP Bullet / Case feeder support tubes.

Primer chute for spent primers replaces the blue plastic spent primer cup and bracket on the Dillon XL650, 750 and Super 1050/1100 reloading press. It completely covers the spent primer ejection port, creating a fully enclosed pathway for spent primers. Spent primers are routed through clear PVC tubing into any convenient waste container.

Live Primer Catcher is practical solution to a problem every XL650 press user is familiar with: live primers being ejected out of the press and falling to the floor. The original ramp on the press does not do a great job catching those live primers as they are ejected. And even if they stay on the ramp, retrieving them without dropping some can be challenging.

As any reloader knows, adjusting a die on a tightly spaced tool head can be difficult and aggravating. The die nuts and various machine parts do not allow easy access and using regular wrenches can be near impossible. The DAA 1 Inch Box-End Wrench is the solution to this problem! The custom made, laser cut, stainless steel wrench is strong enough to last a lifetime and thin-walled enough to fit between any dies for easy access and adjustment.