Rollsizer
 
Price
Category
942.62  
The DC Electric Drive Rollsizer is suitable for the low to medium volume reloader. The DC electric rollsizer produces a similar result as the large scale rollsizer but at a lower cost (and processing rate – 1500 Cases per hour vs 6,400 cases per hour). The DC rollsizers require a minimum run in period of 2-6 hours before use but may occasionally need longer time (up to 12 hours). Running them unloaded overnight is usually best.

1,357.30  
The Rollsizer.com Decapper will process 380ACP cases up to 308Win. The machine will remove the spent primers up to 3,600 cases per hour (if your casefeeder can keep up) and cases can be processed soiled.  You can wet clean your cases afterwards, then rollsize your cases. This will save you a LOT...
In stock
+

89.34  
Disc to suit to suit 9×19. This conversion uses a small pistol drop tube.

28.69  
These same drop-tubes are used in the Rollsizers (commercial, DC and manual) and the automatic Decappers offered by Rollsizer.com. The tubes are made of steel, and are machined to fit the calibers in use. Height adjust of the tube is required when converting calibers.
In stock
+

28.69  
FW Arms Small Decapper pin (0.054″ size) to suit Decapper. These MUST be installed per the instructions detailed in the FW arms instruction manual supplied with the decapper.
In stock
+